Summary written by USA Jobs 24 from GE HealthCare's advert and our data on 16,857 current US jobs. How we check every job
At a glance
GE HealthCare is hiring a Production Associate I in Salt Lake City, UT. It is a full-time role in Engineering & Manufacturing, asking for at least 2 years of experience, first listed on November 10. The description mentions Workday. GE HealthCare has 85 other openings in the US, 2 of them in Salt Lake City, UT. Across all employers on USA Jobs 24 there are 11 Engineering & Mfg openings in Salt Lake City, UT today; the typical one asks for 1 year and advertises about $50,000 a year at the midpoint.
How the pay compares
GE HealthCare has not published pay for this job, or we could not find it in the advert. Of the 541 engineering & mfg jobs across the US on USA Jobs 24, 55% show pay, and the typical yearly midpoint among them is $115,000. That gives you a fair starting point when the subject comes up.
Skills in this advert
How often each skill named in this advert appears across the 541 engineering & mfg jobs we list today.
Paste your resume and this advert into our resume match tool to see which of these words your resume already covers.
Before you apply
- Check it is still open. We found this job on GE HealthCare's Workday site on November 10 and checked it again November 13, 5:17 AM ET. When an employer takes a job down, we remove it at our next daily update.
- Check the location works for you. This role is based in Salt Lake City, UT. If you would need to move, ask whether relocation help is offered.
- Match the experience. The advert asks for at least 2 years of experience. If you are a little short, a close match on the skills in the advert can still win an interview.
- Tailor your resume. Use the advert's own words, such as Workday, wherever they are true for you. Our resume guide shows how.
- Apply only through GE HealthCare's own site. Our Apply button goes straight to GE HealthCare's Workday page. If anyone contacts you about this job and asks for money, gift cards or bank details, stop and check it with our scam checker. Read how to spot a fake job offer.
About hiring at GE HealthCare
GE HealthCare has 86 openings on USA Jobs 24 today across 6 states. Most are in healthcare & pharma (16), software & IT (12) and sales & BD (11). The biggest locations are Waukesha, WI (19), Chicago, IL (3) and Salt Lake City, UT (3). 60% of them are remote, 5% are open to entry-level candidates and 44% show pay. We collect GE HealthCare's jobs every day straight from its own careers system (Workday), never from job boards or agencies.
The employer's advert
This is GE HealthCare's own description of the job, copied word for word from its careers site. We have not edited it.
Show the full advert from GE HealthCareHide the advert713 words
Job Description Summary
The production associate may have responsibilities including manufacturing, assembly, cleaning, packaging, and shipping of products. This is a team line environment where one operator passes their work to the next operator in queue.Job Description
Role Responsibilities
- Performs entry to mid-level manufacturing/assembly operations on production line and other various tasks following procedures, work instructions, and process aid sheets
- Uses lift platforms, hoist, torque tools, and other power hand tools to assemble machines
- Reads and follows work procedures or receives verbal instructions regarding duties to be performed
- Demonstrates excellent verbal and written communication skills
- Maintains daily production output
- Cross trains and work in multiple functions for business flexibility
- Follows all EHS and Quality policies and procedures
- May participate in quality control inspections
- Works with team lead, engineers, supervisors, and managers to improve quality and process efficiency
- Other duties as assigned, and may be asked to be included in quality activities, training sessions, and employee activity teams
- Complies with EHS regulations and policies
- Complies with attendance policies and be willing to work voluntary overtime when needed.
Required Qualifications
- High School Diploma/GED or local equivalent or 6 months of manufacturing experience
- Ability to communicate, receive and understand instructions regarding duties
to be performed - Demonstrated ability to detail and quality-minded work habits
- Demonstrated ability to communicate with co-workers and leadership
- Must be willing to submit to a background investigation, including for example, verification of past employment, criminal history, and educational background
- Must be willing to take a drug test and pass
- Must be legally authorized to work in the United States
- Must be willing to work out of an office daily located in Salt Lake City, Utah
- Must be able to lift (floor to waist, waist to crown level, and horizontally)
- Lift and carry up to 50 lbs. (Anything above 50 lbs. requires assistance)
- Must be able to perform frequent simple grasping, firm grasping, fine manipulation, neck rotation, and neck flexion throughout the workday
- Must be able to twist, push/pull, reach at, above and below shoulder height frequently throughout the workday
- Must be able to frequently stoop and bend; occasionally squat and kneel, throughout the workday
- Must be able to stand/sit continuously throughout the day
- Must be able to ascend/descend/balance occasionally on portable step stool
Desired Characteristics
- Minimum 2 years of related manufacturing experience
- Experience in medical manufacturing or other highly regulated industry preferred.
- Local candidates will be given preference
- Ability to competently read, write, and speak in English
- Demonstrated basic computer skills and ability to navigate online instructions
Quality Specific Goals
- Aware of and comply with the GEHC Quality Manual, Quality Management System, Quality Management Policy, Quality Goals, and applicable laws and regulations as they apply to this job type/position.
- Complete all planned Quality & Compliance training within the defined deadlines
- Identify and report any quality or compliance concerns and take immediate corrective action as required
- Knowledge and understanding of production process, work instructions, documentation configuration control, non-conforming & rework documentation requirements and operates within them to ensure that a device conforms to it’s specification.
- Aware of and comply with Stop Order, Concessions, ESD, Calibration, Preventative Maintenance, Material Identification & Segregation, and Good Documentation Practices, as associated with this job type/position
Additional Eligibility Qualifications
- GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
#LI-SAM1
#LI-ONSITE
#LI-SLC
We will not sponsor individuals for employment visas, now or in the future, for this job opening.

Additional Information
GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.
GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable).
While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees.
Relocation Assistance Provided: No
USA Jobs 24 copied this listing from GE HealthCare's official careers site on November 10, 2026 and checked it again November 13, 5:17 AM ET. GE HealthCare will never ask you to pay to apply or to buy equipment with a check they send you. If anyone does, it is a scam.
Something wrong with this listing? Tell us and we will look into it.
Get engineering & mfg jobs in Utah by email
Similar engineering & mfg jobs in Salt Lake City, UT
Manufacturing Technician 1/2 - D Shift
Northrop Grumman
Northrop Grumman's Space Sector is seeking a Manufacturing Technician – Level 1 or Level 2 to join our team in Salt Lake City, UT.
- Salt Lake City, UT
- $37,400–$62,400 a year
New Entry levelProduction Supervisor
Mars
Production Efficiency: Lead multi-line teams to efficiently convert materials into quality products in a safe, sanitary manner, meeting product design specifications.
- Salt Lake City, UT
- 3+ yrs
Maintenance Lead
Mars
We are seeking a proactive and experienced Manufacturing Maintenance Lead to oversee daily the maintenance of equipment and machinery on the production floor.
- Salt Lake City, UT
- 3+ yrs
Quality Control Inspector-I (Evening Shift)
Motorola Solutions
Silvus is seeking a Quality Control Inspector-I who will report to the Quality Control Inspection Supervisor on the OQC team.
- Salt Lake City, UT
- $21.50–$23.50 an hour
Entry levelElectronics Quality Technician-I (Evening Shift)
Motorola Solutions
The Electronics Quality Technician-I reports into our Manufacturing Leadership. The successful individual in this role will support StreamCaster™ MANET product development and manufacturing.
- Salt Lake City, UT
- $30–$32 an hour
Entry level